In daily life, Tapered Button Bits are greatly affected by the seasons, so the frequency of use is not very large, and the idle time is large, so it also needs regular maintenance and maintenance, because the machine is not maintained when it is idle. The damage caused may exceed the damage during work. The following kaiqiu Drilling Tools Manufacturer explains to the majority of users the problems and countermeasures that are prone to Tapered Button Bits for a long time.

1. The deformation of tractor tires stops, and its weight is completely borne by the four tires. If it is left for too long, it will cause the tires to undergo excessive pressure and deform. The longer the tapered Button Bits are parked, the more difficult it is to recover the deformed place. If the tire shape changes, the tire will lose its balance, and the vibration of the vehicle body will increase when the Tapered Button Bits are driving, which will accelerate tire wear and shorten the life of the tire.

Countermeasures: When parking for a long time, move forward and backward for a few days, so as to avoid keeping the weight in the same position of the tire for a long time to ensure that the tire does not deform.

2. Long-term storage of Tapered Button Bits will cause insufficient lubrication. The reason is that the lubricating oil film in the engine comes into contact with oxygen and acid-based components in the air. For a long time, the lubricating oil film is oxidized and deteriorated, forming a colloid, and naturally there will be no lubrication. When the Tapered Button Bits that have been placed for a long time are in use, the cylinder and piston will cause serious insufficient lubrication when starting, accelerate the wear of the parts, and it will be difficult to start or fail to start. If the time is too long, the engine will be completely damaged.

Response: Start at least once a month to keep the engine lubricated. If necessary, some lubricating oil can also be injected.

3. The battery will discharge slowly if it is not used for a long time. If it is not charged in time, the active material on the electrode plate will gradually form hard lead sulfate after over-discharge. Lead sulfate crystal has low conductivity and large volume, which hinders the pores of the active material and the penetration and diffusion of electrolyte. At the same time, lead sulfate is not easily converted into lead dioxide and spongy lead during charging. Lead sulfate will lose its reversible effect, reduce the effective material of the electrode plate, reduce the discharge capacity, shorten the service life, and make the battery serious.

Countermeasures: If the tractor is not used for a long time, the vehicle will start every 30 days and drive at a medium speed for about 30 minutes. If there is a special charger, the battery should be taken out, the outer surface should be clean, fully charged, and placed in a clean and warm room. During storage, charge it at least once a month to prevent cracking or sulfide. When charging, use a special charger, the charging current should be appropriate, the current is too small to charge for a long time; too much will damage the battery. In addition, when charging, you must unscrew the battery cover and pay attention to ventilation, so we can't use an open flame to approach the battery charging port, because the hydrogen produced by the battery is easy to ignite.

4. The spring and transmission belt are deformed. If parts of the tractor, such as springs and transmission belts, are subjected to long-term force, plastic deformation will occur. After the force disappears, the original shape cannot be restored.

Countermeasures: All the compression or springs of the tractor must be loosened. For example, the intake and exhaust valves of the engine should be closed, the clutch handle of Tapered Button Bits should be placed in the closed position, and the transmission belt should be hung on the wall.

5. The water tank is freezing and cracking. It is very cold in the winter in the north. If the Tapered Button Bits are left for a long time, if the water of the engine is not drained, the abnormal expansion of the water will freeze the body and the water tank.

Countermeasures: As long as the Tapered Button Bits are in a long-term parking state, the water in the Tapered Button Bits must be drained, especially in areas where the temperature is below 0 degrees.

6. Rubber parts are aging, performance is reduced, and service life is obviously shortened. The rubber parts on tractors are mainly tires, gaskets and dust boots. In the process of long-term storage, due to sunlight, deformation by external force, oil pollution and other reasons, it will accelerate cracking, reduce elasticity and strength, become sticky, harden and become brittle.

Countermeasures: First, try to avoid storing and parking in direct sunlight, and use metal garage doors as much as possible; second, avoid sticking oil on the rubber part, if it is sticky, scrub it immediately; third, avoid long-term stress and deformation.

7. The surface of Tapered Button Bits is rusty, which causes metal corrosion due to the action of acid, alkali, saline solution and oxygen, carbon dioxide, sulfur dioxide, ammonia and moist air. The metal parts of Tapered Button Bits lose their luster when rusted. In severe cases, flake or powder oxides will be formed, reducing the size of parts, reducing mechanical strength, shortening service life, and even completely losing use value.

Countermeasures: First, wash thoroughly before storage. The dust and oil on the tractor should be removed, and the lubricating parts should be lubricated according to the maintenance regulations. The second is touch up paint. Find out the painted surface, paint partly, and apply anti-rust grease to the surface without rust. The third is moisture-proof. The warehouse should be ventilated and dry, and the relative humidity of the air should be kept below 70%. The fourth is to prevent the emission of harmful gases. Do not park Tapered Button Bits next to piles of garbage, firewood and corrosive materials to prevent the corrosion of harmful gases.