How to extend the life of the door lock

       Both mechanical door locks and smart door locks are actually the same as other furniture products. As the time used increases and the loss increases, various minor problems will appear, and the life problem will follow. So how can these problems come later and extend the service life of the door lock? Undoubtedly, it is closely related to the maintenance of daily use. However, the maintenance of the door lock may be a distressing problem for some users, and I don't know how to maintain it. Don't worry, the Outdoor Waterproof Lock Factory will probably explain to you how to maintain the door lock.
 
       As smart door locks are improved on the basis of traditional mechanical door locks, smart door locks are more secure and convenient. So the two are slightly different in maintenance.
     Mechanical door lock maintenance
       1. Always keep lubricant on the transmission part of the lock body to keep its transmission smooth. Check once half a year or once a year, and check whether the fastening screws are loose to ensure that they are fastened.
       2. When the lock is in use, regularly (half a year or a year) or when the key is not smoothly inserted or unplugged, a little graphite powder or pencil powder can be put into the lock core groove to ensure smooth key insertion and unplugging. But do not add any other oils for lubrication, to avoid grease sticking to the pin spring, causing the lock head to be unable to rotate and be unable to open.
       3. Frequently check the gap between the lock body and the lock plate, whether the height of the bolt and the hole of the lock plate is suitable, and the gap between the door and the door frame is 1.5mm-2.5mm. If you find any changes, you should adjust the position of the hinge or the lock plate on the door. At the same time, pay attention to the cold shrinkage and thermal expansion caused by the weather (humid summer, dry winter and spring), and ensure that the gap between the door and the door frame, the lock body and the lock plate is reasonable to ensure the smooth use of the lock.
 
       4. In normal use, if there is dirt, it can be removed with a dry cloth, and do not scrub with detergent or other chemicals. Otherwise, it will damage the protective film and cause color fading. Do not wipe the lock body and handle with a damp cloth, because some metal locks will rust; alloy locks will wear off the coating and lose their aesthetic effect. Some zinc alloy and copper locks will find "spots" after being installed on the door for a long time. This phenomenon is not rust, but oxidation. If this happens, just spray it with surface wax. The spots can be removed.
    Smart door lock maintenance
      1. Avoid moisture and chemical corrosion (Smart door locks with fingerprints have been used for a long time, and the surface of the color window where the fingerprints are applied may be wet or dirty. To avoid moisture and scratches, wipe gently with a dry cloth. Remember Can not be cleaned with alcohol, gasoline, thinner or other flammable substances)
      2. Do not apply pressure to the door lock (do not apply pressure or percussion to the smart door lock liquid crystal vigorously, and do not use hard objects to collide or percussion the housing)
      3. When the battery power is low, replace the battery in time to ensure that the door lock can be used normally.
I believe that through the above explanation, everyone should have a more or less understanding of the maintenance of the Heavy Duty Covered Iron Padlock. In fact, as long as you are a caring person in daily use, I believe that everyone's life of family safety protection god can be extended!