Stainless Steel Kitchen Cabinets Suppliers introduce the size requirements of the cabinets:

1. Base cabinet: In terms of cabinet design, the size standard of the cabinet base cabinet is related to the size of the countertop sink. From an ergonomic point of view, the height of the cabinet and base cabinet should be controlled within the range of 780 mm, and the size of the sink should be controlled within the range of 470 mm X880 mm.

2. There is a certain relationship between the size of the cabinet and the daily use habits. If you are used to opening the door from left to right, the width of the cabinet should be similar to that of the floor cabinet. If you are accustomed to flip the door open , then the minimum size standard of the hanging cabinet should reach 500 mm, and the maximum should be within the range of 1000 mm, but if the material of the cabinet is not good, it is easy to deform during the process of turning the door.

3. The cabinet door can be said to be the "face" of the entire cabinet. The common cabinet door size range can be controlled within 200 mm - 600 mm. The size of the cabinet door panel can be controlled within the range of 500 mm to 700 mm.

4. The cabinet drawer greatly enhances the storage capacity of the cabinet. The size of the drawer can be controlled within 300mm-1000mm, and it needs to be drawn with invisible slides or horseback riding. If the drawer size is a small drawer of 300 mm to 700 mm, then the cabinet drawer can use ordinary three-section slides.

5. Cabinet countertops often come into contact with all kinds of ingredients and seasonings. The countertops are not as good as the ones with good quality, health and environmental protection, and the most suitable size. The width of common finished cabinet countertops should not be less than 900 mm × 460 mm.

Through the above introduction, Lavatory Cabinet Suppliers hopes that you can simply refer to the content of this article in future use.