How should electric hedge trimmer blades be adjusted and replaced?
When using a hedge trimmer, I found that the pruning effect is not as good as before. I need to adjust the blade of the electric Lawn Mower. How to adjust it? The following hedge trimmer technicians will introduce the adjustment method for you:

The electric hedge trimmer is fixed by nuts and screws. When fixing, pay attention to loosen the nut first, and then turn the bolt clockwise until it stops. Note that the screw needs to be tightened half a turn. To ensure fastening, a screwdriver must be used. After the blade has been adjusted with bolts and nuts, it needs to be polished smooth again with lubricating oil.

If you find that the blades are dull and your electric hedge trimmer is not running smoothly, you need to sharpen the blades. When grinding, avoid grinding the blade surface or seams.

When sanding an electric hedge trimmer, hold the sander at a 45-degree angle and use the sanding edge to sharpen the blade.

When replacing the hedge trimmer blade, it is necessary to turn off the power to prevent the machine from automatically starting and causing injury. In addition, you need to wear gloves when changing the blade, and take protective measures. The specific method is:

Remove the old blade, hold the knife by hand, loosen the blade nut, and remove the bolt and blade. When removing the old blade, all bolts and nuts will be removed at the same time. Install the prepared new blade and tighten the nut. If there are weeds on the blade, keep it clean.

Regarding the precautions for replacing the hedge trimmer blade, if you are not sure about the model and size of the replacement blade, you can consult the purchaser. The above is the adjustment method of the electric Lithium Chain Saws blade. When using a blade in daily life, the sharpness and firmness of the blade must be guaranteed.